表面硬化鍍膜PC

光學級PC表面硬化處裡-Hard coating PC 光學板/薄膜

 

特性:高硬度光學級PC卷材/薄膜/板材,表面加硬處理(Hard coating),防刮傷,最高可達750g 3H的硬度。
本類產品介紹表面硬度 1H常規硬化板,大量備有庫存,常取代帝仁光學硬化PC板
顏色:
透明
表面硬度:1H   
如需更高硬度請連結-高硬度光學PC(1-3H)
尺寸:
硬化有效面積為900 x 1800 mm (單面硬化/雙面硬化) 可依客戶需要尺寸裁切包裝。
厚度 :0.125mm / 0.25mm / 0.375mm / 0.5mm / 0.8mm / 1.0mm / 1.2mm / 1.5mm
訂製厚度 2.0mm ~10mm,可選高硬度/高耐磨/ 訂做尺寸1200 x 2400mm (有效硬化面積)

PC硬化板特性:

油墨適印性好,無縮水現象
膜層附著力強,通過百格測試
耐化學藥水(如甲醇,丙酮) ,耐鹽水( 35℃ 5%重量的氯化鈉水溶液)
耐高溫( 80℃烘烤)不變形最高耐溫130℃,耐濕熱(溫度60℃ ,濕度95 %測試)強化膜無影響
電鍍效果好,鍍膜附著力強,成品率高, 95 %以上
柔韌性佳,抗衝擊,耐疲勞,防刮花,耐摩擦;

PC硬化板常見用途:

手機鏡片,手機按鍵, MP3 / 4鏡片,手機觸摸屏,薄膜開關等

Property Test Method Units Value Note
 Manufacturing Specifications
Thickness Tolerance Thickness Measuring System % < ±5 0.5mm or less than 0.5mm
< ±3 more than 0.5mm
 Optical Property
Light Transmittance ASTM D1003 % >90 at 550nm
Yellow Index ASTM E313 % <1.0  
Haze ASTM D1003 % <0.5  
 Thermal Property
Thermal Shrinkage   % <±0.15 130℃, 30min
 Mechanical Property
Abrasion resistance i-comp. Method   No scratches Steel wool #0000
Pencil hardness ISO 15184   HB 750g load(n=5,c=2)
Adhesion ISO 2409 ea/100 100/100  
Bendability     No crack <0.5T, 30Ø
Printability     Good Oil pen
 Chemical Property
Solvent resistance    

No visual change

Methanol Acetone DMF
 Heavy Metal Contents
Cadmium(Cd)     N.D. Test Report for ROHS and Halogen free
Lead(Pb)     N.D.
Mercury(Hg)     N.D.
Hexavalent Chromium(Cr VI)     N.D.
Arcenic(As)     N.D.
Beryllium(Be)     N.D.
 Brominated Flame Retardants
Polybrominate Bisphenyls(PBBs)     N.D. Test Report for ROHS and Halogen free
Polybrominate Diphenyl Ethers(PBDEs)     N.D.
 

產品提供的文件資料